Brown Metals Company Website - Knowledge Base Search

Brown Metals Company
KnowledgeBase
Thursday, September 09, 2010

Mechanical Properties for Stainless & Cold Rolled Steel - This article has been rated a 3.6 by 18 people.

Alloy	Temper	Tensile Strength Minimum (psi)	Yield Strength Minimum 0.2% offset (psi)	% Elongation in 2" Minimum	Notes
301	1/4 Hard	125,000	75,000	25 %	-
301	1/2 Hard	150,000	110,000	15 %	-
301	Full Hard	185,000	140,000	8 %	-
302	Annealed	75,000	30,000	40 %	-
302	1/4 Hard	125,000	75,000	10 %	-
302	1/2 Hard	150,000	110,000	9 %	-
302	Full Hard	185,000	140,000	3 %	-
304	Annealed	75,000	30,000	40 %	-
304	1/4 Hard	125,000	75,000	10 %	-
304	1/2 Hard	150,000	110,000	6 %	-
304	Full Hard	185,000	140,000	3 %	-
304L	Annealed	70,000	25,000	40 %	-
305	Annealed	70,000	25,000	40 %	-
316	Annealed	75,000	30,000	40 %	-
316L	Annealed	70,000	25,000	40 %	-
321	Annealed	75,000	30,000	40 %	-
410	Annealed	65,000	30,000	20 %	-
17-7	Annealed	150,000 max	65,000 max	20 %	-
17-7	Condition "C"	200,000	175,000	1 %	-
C1010	Annealed	-	-	-	Requires B 55 max hardness
C1010	#1 Temper	-	-	-	Requires B 90 min hardness

All values specified are approximate minimums unless otherwise specified. Values are derived from the applicable AMS and ASTM specifications.

Article Date: 4/7/2005 5:49:39 PM Last Updated: 4/7/2005 5:50:09 PM