Brown Metals Company Website - Knowledge Base Search

Brown Metals Company
KnowledgeBase
Thursday, September 09, 2010

Material Specifications Chart for Stainless & Cold Rolled Steel - This article has been rated a 0.1 by 3205 people.

Brown Metals can offer the following specifications. Material is certified to the latest specification revision in most instances.

Cancellation Notices & Notes For Other Specifications

Specification	Comments
MIL-S-5059	MIL-S-5059 was cancelled effective September, 1993. This specification covered a variety of alloy/temper combinations. The AMS specifications should be used as replacements for MIL-S-5059.
QQ-S-766	QQ-S-766 was cancelled effective July, 1993. It has been replaced by the ASTM specifications listed in the table above. Use the following guidelines for requesting the correct replacement specification: Cold Worked Grades (Tempered): ASTM-A-666 Precipitation Hardening Grades (17-7): ASTM-A-693 Other grades, including Annealed (soft): ASTM-A-240
MIL-S-25043	MIL-S-25043 was cancelled effective May, 1997. This specification was specific to the 17-7 grade. The corresponding AMS specifications in the table above are to be used as replacements for MIL-S-25043.
AMS-5515	AMS-5515 is the specification for 302 Annealed with a Carbon (C) content of .08 - .15. Brown Metals Company purchases material to meet both 302 / 304. Because 304 has a maximum Carbon (C) reading of .08, we are not able to certify to AMS-5515. All 302 / 304 material at Brown Metals Company will have a Carbon reading LESS THAN .08.

Specifications, cancellation notices, and other documents can be obtained by contacting Document Engineering (1-800-MIL-SPEC).

Article Date: 3/31/2005 5:28:45 PM Last Updated: 1/12/2006 5:55:06 PM